Cooled High-Sensitivity Camera
The Advanced Resolution&Sensitivity
A high-resolution up to 640*512 pixels with a temperature sensitivity as low as 0.02℃@30℃.
IMIX (Integrated Multi-Dynamic Imaging)
Enhances thermal images in real-time by incorporating visible light details, resulting in improved clarity and the integration of edge and contour information into thermal readings.
Recording & Playback
SD card storage for playback or transfer to PC software for analysis.
Various Focusing Styles
One-touch automatic focusing or manual focusing, bring distant targets into sharp focus using the advanced 1/2/4/8x digital zoom.
Laser rangefinder is capable of reaching distances up to 40 meters.
Enhance the pixels of IR image count by 4 times.
Text annotations to be editable from a preset list, and adding voice annotations is available.
|Quantum Well Infrared Photodetector (QWIP)
|10.3-10.8 μm, with a central wavelength of 10.55 μm
|Built-in color viewfinder with a resolution more than 1024×768 pixels
|Image Frame Rate
|Standard Temperature Measurement Range
|-20℃~ 150℃ (low-temperature range), 0℃~ 410℃ (mid-temperature range)
|Optional Temperature Measurement Range
|To be determined
|Temperature Measurement Accuracy
|+2°C or +2% of the reading
|Built-in 500W pixel digital camera with LED light
|Lens Focusing Method
|Manual and automatic
|5.8-inch sunlight-visible display screen, 1280*768 pixels (to be confirmed based on the model)
|Ten color palettes: Iron Red/Gray/Inverted Iron Red/Inverted Gray, etc.
|Point, Line, And Area Temperature Measurement Settings
|Supports up to 10 points, 10 boxes, and 5 lines simultaneously, including maximum value/minimum value/average value
|Line Temperature Distribution Map
|One line temperature distribution map, including highest/lowest temperature values
|Full-Screen Maximum Temperature/Minimum Temperature
|Supports automatic capture of full-screen maximum temperature/minimum temperature
|Automatic/manual; linear or histogram; able to lock maximum value, minimum value, or temperature range
|x1, x2, x4, x8 (continuous zoom from 1 to 8 times)
|Displays the infrared image area on the visible light image
|Automatically calculates the temperature difference between each temperature measurement box (temperature difference between each measured temperature value and the reference temperature)
|Selects text annotations from a preset list, editable in the thermal imager
|Supports voice annotations, stored along with the image
|Increases the pixel count by 4 times
|Optical Device Transmission Calibration
|Manual/automatic, based on signals from internal sensors
|Automatic, based on input of emissivity values
|Atmospheric Transmission Calibration
|Automatic, based on input of distance, atmospheric temperature, and relative humidity values
|Provides audio and visual alarms for temperature values above/below/set values or automatically
|32GB high-speed SD card (approximately stores over 4000 infrared images)
|Infrared Image Format
|jpg (including full temperature data) / png (including full temperature data) / national grid standard format
|Visible Light Image Format
|Infrared Video Format
|H.264 video / full-temperature video stored on SD card
|Transfers images from the SD card to a PC via USB
|Video Output Interface
|Standard HDMI interface
|Removable rechargeable lithium battery
|Power Supply Voltage
|DC 12V 5A
|Battery Operating Time
|>2 hours for general use at 25°C
|Supports sleep mode (automatic shutdown function available, 5 mins/20 mins or no automatic shutdown)
|Dual-seat charger or 12V car charger
|Humidity (Operating And Storage)
|Compliance With National Standards
|Large SD, SIM, HDMI, USB